I-Meet meeting tables are designed for modern meeting rooms that host teleconferencing and often use audio and video equipment. I-Meet offers a wide range of shape and size modeling capabilities. By combining different I-Meet table modules, you can create the ideal space for small meeting rooms and large conference rooms. 

Design by Nikolas Chachamis.

Dimensions: 

- 1600 х 1600, H = 750 mm;
- 2400 х 1200, H = 750 mm;
- 3200 х 1600, H = 750 mm;
- 4000 х 1600, H = 750 mm;
- 4800 х 1600, H = 750 mm;
- 3200 х 3200, H = 750 mm.

TECHNICAL INFORMATION:  

SURFACES:
- Wood surfaces : made with MDF panels 30 mm thick covered with 3d-foil, with smooth angles. Available in the following colours: GREY ELM 12, BALI WALNUT 30, BLACK 56, WENGE 60, WHITE 68, GREY BEIGE 83.
- Glass surfaces : made in tempered plate 12 mm thick polished wire rear-lacquered with smooth angles. The structure is fixed with two steel brackets stuck on the inside of the surface Available in the colours: BLACK 10.

TOP ACCESS
Available in two types: without and with electrical sockets. Made of painted aluminum in the finishes: BLACK and WHITE. Equipped with a dual opening system for access to the wiremanager compartment below or, in the second version, to the electrical sockets supplied. Both types are equipped with a black dust brush.

METAL BASE LEGS
Made with 70x20mm steel tubular, available in two versions:
- BLACK (MATT) epoxy dust painted
- Chrome polished 60 mm diameter adjustable feet. The end and middle legs are compatible between them and enable the aggregation of various modules suitable for the configuration of multiple types of round or rectangular tables used for small and medium meeting rooms as well as board rooms.

HORIZONTAL METAL STRUCTURE
Structure made with stiffening beams in 50x20mm tubular painted with epoxy dust in colours: SILVER and BLACK (MATT). The structure is pre-perforated for fixing the surface screws. The base legs assembling is carried out with fast metal connections equipped with taper screws.

SUBSTAGE WIRE MANAGEMENT CONTAINER
- Made with (MDF) fibreboard panels 18 mm thick covered with 3d-foil, available in the following colours: GREY ELM 12, BALI WALNUT 30, BLACK 56, WENGE 60, WHITE 68, GREY BEIGE 83. It is a bay for housing the climbings and the cable linear developments and any table supplementary technical equipment kit. Inside is a transversal panel for stiffening the structure made of 18 mm thick wooden particles, on which the cable holder is anchored, ideal for positioning the technical equipment (schuko sockets, speech and data sockets) as well as excess cables . Access to the Wire management container is gained directly from the work surface through the top access or at the side of the container, through the panel trigger opening.

CREDENZA:
- Structure made of particleboard panels 18 mm thick, melamine faced. The melamine edge 0.4 mm thick in the same colour as the surface is applied on the perimeter. All visible elements: base, top, final side panels, doors and back panel are made of MDF 18mm thick. covered with 3D-FOIL. The internal structure is in colour BLACK 59 or WHITE 68, it's matched with : GREY ELM 12, BALI WALNUT 30, BLACK 56, WENGE 60, WHITE 68, GREY BEIGE 83. The doors are equipped with a CHROMED horizontal handle or epoxy powder coated in the BLACK color. The credenza rests on a metal structure consisting of a central beam and two ring-shaped legs made of tubular section 25 x 50 x1,5 mm and metal sheet 6 mm thick. The metal structure is available in CHROME or epoxy powder coated in the BLACK  (MATT) color.

LECTERN
- Structure made of particleboard panels 18 mm thick, melamine faced. The melamine edge 0.4 mm thick in the same colour as the surface is applied on the perimeter. Available colours: BLACK 59 and WHITE 68. All visible elements, the front panel, top shelf and sides are made of MDF covered with 3D-FOIL. The front panel and the shelf are 18 mm thick, the sides are 25mm thick. They are coated on both sides. On the perimeter they are refined with a decorative thread with chrome effect. Plastic cable-ways are fitted on the shelf, on the inside back and on the base. The 3D-foil coated parts are available in the following colours: GREY ELM 12, BALI WALNUT 30, BLACK 56, WENGE 60, WHITE 68, GREY BEIGE 83. The WHITE 68 internal structure is matched with WHITE 68 finish. The BLACK 59 internal structure is matched with: GREY ELM 12, BALI WALNUT 30, BLACK 56, WENGE 60, GREY BEIGE 83.